Hydraulic Tandem Pump Installation
1. Turn the engine until the 2 pump coupler set screws
are positioned at approximately 1 o'clock and 3
o'clock (Fig. 1528).
2. Ensure the key is installed in the pump shaft keyway
(Fig. 1529).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1528
DSC-1747a
Fig. 1529
DSC-1749a
3. Apply anti-seize compound to the pump shaft (Fig.
1530).
4. Install the pump shaft into the pump pulley aligning
the key in the shaft with the keyway in the pulley
(Fig. 1531).
Fig. 1530
DSC-1750a
Fig. 1531
DSC-1751a
6/2-57