4-PAW DIESEL/HYDRAULICS
7. Install a cable tie around the tilt cylinder hydraulic
hoses (Fig. 1440).
8. Install a cable tie around the cylinder barrel and
hydraulic hose (Fig. 1441).
6/2-34
Fig. 1440
IMG-0137a
Fig. 1441
IMG-0139a
9. Grease the pivot pins and bushings using general
purpose grease (Fig. 1442 and Fig. 1443).
10. Check the hydraulic fluid level and add as
necessary.
11. Start the machine and check for leaks.
12. Purge air form the system.
13. Check the hydraulic fluid level again and add as
necessary.
Toro Wheeled CUL Service Manual
Fig. 1442
IMG-0140a
Fig. 1443
IMG-0141a