Toro 22317 Service Manual page 201

CHAIN DRIVE/HYDRAULICS
3. Position the auxiliary bracket over the handle and
onto the auxiliary valve (Fig. 0651).
4. Install the straight fitting into the auxiliary valve (Fig.
0652).
4/2-32
Fig. 0651 PICT-9959a
Fig. 0652 PICT-9972a
5. Loosely install the selector valve onto the straight
fitting (Fig. 0653).
Note: Do not tighten at this point. You may need to
adjust the spacing between the two valves to
match the mounting holes on the machine.
6. Before installing the valves to the upper frame,
notice the two different size spacers used on the
valves. The two short spacers are used on the
auxiliary valve (A) and the two longer spacers are
used on the selector valve (B) (Fig. 0654).
A
Toro Wheeled CUL Service Manual
Fig. 0653 PICT-9973a
B
Fig. 0654 PICT-9976a