4-PAW DIESEL/ENGINE
13. Using a 15/16" wrench, remove the front hydraulic
line from the front pump fitting (Fig. 1896).
14. Using a 15/16" wrench, remove the rear hydraulic
line from the pump fitting (Fig. 1897).
6/4-80
Fig. 1896
DSC-1622a
Fig. 1897
DSC-1625a
15. Using a 9/16" wrench, remove the 2 pump mounting
bolts (Fig. 1898).
16. Slide the pump assembly out of the chassis (Fig.
1899).
Toro Wheeled CUL Service Manual
Fig. 1898
DSC-1626a
Fig. 1899
DSC-1638a