Toro 22317 Service Manual page 542

3. Adjust the stop arm (Fig. 1879):
a. Position the stop rod to the engine linkage.
b. Loosen the stop rod jam nut.
c. Push stop rod in and the engine linkage lever
forward.
d. Adjust the stop rod by threading it in or out of the
solenoid until it falls into the engine linkage hole.
e. Lock the jam nut.
C
A. Stop rod
B. Engine linkage
Toro Wheeled CUL Service Manual
A
B
Fig. 1879 IMG-0166a
C. Jam nut
4-PAW DIESEL/ENGINE
4. Install a cotter pin into the end of the fuel shut down
solenoid stop arm to secure (Fig. 1880).
5. Plug the fuel shut down solenoid connector into the
wire harness connector (Fig. 1881).
Fig. 1880 IMG-0161a
Fig. 1881 IMG-0085a
6/4-75