Glow Plug Installation; Muffler Replacement; Muffler Removal - Toro 22317 Service Manual

Glow Plug Installation

1. Thread the new glow plug(s) into the cylinder head
(Fig. 1884).
2. Torque the glow plug(s) to 5.8 to 10.8 ft-lbs. (7.8 to
14.6 Nm) (Fig. 1885).
3. Install the glow plug bus bar onto the glow plugs.
4. Install the power wire onto the glow plug located
farthest back on the engine.
5. Thread a nut onto each of the glow plugs to secure
to glow plug power wire and bus bar.
6. Tighten the 3 nuts.
7. Close the rear cover.
Toro Wheeled CUL Service Manual
Fig. 1884 IMG-0154a
Fig. 1885 IMG-0156a
4-PAW DIESEL/ENGINE

Muffler Replacement

Muffler Removal

1. Remove the radiator. Refer to "Radiator Removal"
on page 6/4-92.
2. Using a 7/16" socket, remove the 4 bolts and lock
washers securing the fan to the fan adapter (Fig.
1886).
3. Remove the fan assembly (Fig. 1887).
Fig. 1886 DSC-1604a
Fig. 1887 DSC-1606a
6/4-77