4-PAW DIESEL/ENGINE
15. Using a 15/16" wrench, remove the front hydraulic
line from the pump fitting (Fig. 1838).
16. Using a 15/16" wrench, remove the rear hydraulic
line from the pump fitting (Fig. 1839).
6/4-64
Fig. 1838
DSC-1624a
Fig. 1839
DSC-1625a
17. Using a 9/16" wrench, remove the 2 pump mounting
bolts (Fig. 1840).
18. Slide the pump assembly out of the chassis (Fig.
1841).
Toro Wheeled CUL Service Manual
Fig. 1840
DSC-1626a
Fig. 1841
DSC-1639a