ALL UNITS/GENERAL
33. Repeat the previous 2 steps for the second bushing.
34. Making note of the markings on the bushing
assembly, install the drive gear into the bushing (Fig.
0209).
35. Install the driven gear into the bushing (Fig. 0210).
3/1-58
IMG-0252a
Fig. 0209
IMG-0253a
Fig. 0210
36. Install the second bushing onto the 2 gears (Fig.
0211).
37. Making note of the marks on the 11gpm pump, slide
the drive gear shaft of the 11gpm pump assembly
into the mounting flange (Fig. 0212).
Toro Wheeled CUL Service Manual
IMG-0255a
Fig. 0211
IMG-0265a
Fig. 0212