Toro 22317 Service Manual page 552

4. Insert 3 manifold mounting bolts into the engine
manifold (Fig. 1915).
5. Position a new manifold gasket on the 3 manifold
mounting bolts (Fig. 1916).
Toro Wheeled CUL Service Manual
Fig. 1915 DSC-1672a
Fig. 1916 DSC-1673a
4-PAW DIESEL/ENGINE
6. Position the muffler into the chassis. Slide the lower
mounting bracket slot onto the mounting bolt that
was previously loosely installed (Fig. 1917).
Note: The bracket should be between the washer
and the engine block.
7. Slide the muffler manifold flange onto the 3 manifold
mounting bolts. Install 3 lock washers and nuts
to secure the muffler to the engine manifold (Fig.
1918).
Fig. 1917 DSC-1686a
Fig. 1918 DSC-1690a
6/4-85