Toro 22317 Service Manual page 526

129. Check and fill the Hydraulic fluid:
• Hydraulic Tank Capacity: 17.25 gal. (67 l)
• Use 10W-30 or 15W-40 detergent, diesel
engine oil (API service CH-4 or higher).
a. Clean the area around the filler neck of the
hydraulic tank (Fig. 1820).
b. Remove the cap from the filler neck and check
the fluid level on the dipstick (Fig. 1820).
A. Filler neck cap
c. If the level is low, add enough fluid to raise it to
the proper level.
d. Install the cap on the filler neck.
130. Start the machine.
131. Purge air from the hydraulic system.
132. Check for leaks.
133. Turn the machine off and remove the key.
134. Check the hydraulic fluid level and add if
necessary.
Toro Wheeled CUL Service Manual
A
B
fig. 9 m-4596
Fig. 1820
B. Dipstick
4-PAW DIESEL/ENGINE
135. Position the rear access door onto the unit (Fig.
1821).
136. Using a 1/2" socket, tighten the 2 bolts securing the
rear access door to the frame (Fig. 1822).
Fig. 1821 DSC-2692a
Fig. 1822 DSC-2694a
6/4-59