Toro 22317 Service Manual page 481

4-PAW DIESEL/ENGINE
51. Discard the 4 mounting bolts, but retain the 4
washers for installation.
52. Place suitable lumber on the operator's platform.
Slide the engine backward so that it rests on the
lumber being careful to clear the muffler tail pipe
from the hole in the frame (Fig. 1643).
53. Position an approved engine hoist and connect a
chain to the 2 engine lift points. Remove the engine
from the frame (Fig. 1644).
6/4-14
Fig. 1643 DSC-2128a
Fig. 1644 DSC-2529a
54. Position engine on a suitable workstation and
disconnect the chain from the 2 engine lift points.
55. Using a 5/16" socket, remove the hose clamp from
the top radiator hose (Fig. 1645).
56. Remove the top radiator hose (Fig. 1646).
Toro Wheeled CUL Service Manual
Fig. 1645 DSC-0049a
Fig. 1646 DSC-0052a