4-PAW GAS/ENGINE
42. Place suitable lumber on the operator stand to
receive the engine (Fig. 1138).
43. Slide the engine back onto the lumber on the
operator stand (Fig. 1139).
5/4-10
Fig. 1138
DSC-1175a
Fig. 1139
DSC-1177a
44. Using a properly rated hoist and chains, lift the
engine out of the frame (Fig. 1140).
45. Rotate the engine crankshaft until the 2 hydraulic
pump coupler set screws are accessible through the
opening in the pump mount (Fig. 1141).
Toro Wheeled CUL Service Manual
Fig. 1140
DSC-1178a
Fig. 1141
DSC-1181a