21. Remove the hub from the wheel motor shaft and
discard (Fig. 1240).
22. Place a drain pan under the front wheel motor.
23. Using a 1-1/8" wrench, remove the upper hydraulic
line from the upper wheel motor fitting (Fig. 1241).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/DRIVE SYSTEM
DSC-0927a
Fig. 1240
DSC-0928a
Fig. 1241
24. Using a 1-1/8" wrench, loosen the left hand upper
hydraulic line from the bulkhead fitting in the main
frame (Fig. 1242).
25. Rotate the upper hydraulic line out and allow the
fluid to drain in the drain pan (Fig. 1243).
DSC-0929a
Fig. 1242
DSC-0930a
Fig. 1243
6/1-5