4-PAW DIESEL/DRIVE SYSTEM
3. Loosely install 4 wheel motor mounting bolts (Fig.
1252).
4. Using a 3/4" socket, tighten and torque the 4 mount-
ing bolts to 75 ± 8 ft-lbs. (102 ± 11 Nm) (Fig. 1253).
6/1-8
DSC-0951a
Fig. 1252
DSC-0952a
Fig. 1253
5. Remove the floor jack.
6. Using a 1-1/16" socket, install the 2 wheel motor
fittings (Fig. 1254).
7. Using a 1-1/8" wrench, install the lower hydraulic line
to the lower wheel motor fitting (Fig. 1255).
Toro Wheeled CUL Service Manual
DSC-0953a
Fig. 1254
DSC-0954a
Fig. 1255