4-PAW DIESEL/ENGINE
91. Using a 12mm socket, remove the lower starter
mounting bolt and lock washer (Fig. 1683).
92. Using a 17mm socket, remove the bolt securing the
breather hose R clamp to the engine mount plate
and engine block. Using a 17mm socket, remove the
remaining 2 bolts and lock washers (Fig. 1684).
6/4-24
Fig. 1683
DSC-2276a
Fig. 1684
DSC-2281a
93. Remove the r-clamp from the breather hose and
retain it to transfer to the breather hose on the new
engine (Fig. 1685).
94. Lift and separate the engine from the engine mount
assembly (Fig. 1686).
Toro Wheeled CUL Service Manual
Fig. 1685
DSC-2285a
Fig. 1686
DSC-2286a