CHAIN DRIVE/HYDRAULICS
4. Position a drain pan under the front of the machine.
Remove the hydraulic lines from the tilt cylinder
fittings (Fig. 0688). Allow the hydraulic fluid to drain
into the drain pan.
5. Remove the shoulder bolt from the upper pivot pin
(Fig. 0689).
4/2-42
Fig. 0688
DSC-2859a
Fig. 0689
DSC-2862a
6. Remove the pivot pin and the tilt cylinder from the
machine (Fig. 0690).
Toro Wheeled CUL Service Manual
Fig. 0690
DSC-2864a