10. Remove the back-up seal from the piston assembly
(Fig. 0151).
11. Remove the nut securing the piston to the cylinder
rod (Fig. 0152).
Toro Wheeled CUL Service Manual
IMG-0332a
Fig. 0151
IMG-0333a
Fig. 0152
ALL UNITS/GENERAL
12. Slide the piston off the end of the rod (Fig. 0153).
13. Remove the o-ring from the rod (Fig. 0154).
IMG-0334a
Fig. 0153
IMG-0335a
Fig. 0154
3/1-43