19. Install a bolt to secure the pivot pin to the cylinder
yoke. Torque the bolt to 19 ft-lbs. (26 Nm) (Fig.
1584).
20. Position the attach plate to the loader arm pivot
points (Fig. 1585).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/LOADER ARM
DSC-1485a
Fig. 1584
DSC-1487a
Fig. 1585
21. Install the right and left side pivot pins into the pivot
points (Fig. 1586).
22. Align the tilt cylinder ram with the attach plate center
pivot point. Install the center pivot pin securing the
tilt cylinder to the attach plate (Fig. 1587).
DSC-1489a
Fig. 1586
DSC-1491a
Fig. 1587
6/3-11