Toro 22317 Service Manual page 108

6. Raise the front of the machine (Fig. 0309).
7. Position jackstands under the front 2 corners of the
machine. Remove the floor jack (Fig. 0310).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/DRIVE SYSTEM
DSC-0105a
Fig. 0309
DSC-0107a
Fig. 0310
8. Raise the loader arms to the fully raised position.
9. Turn off the engine and remove the key.
10. Remove the loader arm cylinder locks located on the
hydraulic auxiliary lines (Fig. 0311).
11. Position a loader arm cylinder lock over each lift
cylinder rod (Fig. 0312).
DSC-0448a
Fig. 0311
DSC-0452a
Fig. 0312
4/1-11