10. Using a 13/16" offset wrench, remove the tilt cylinder
hydraulic line from the 4-spool valve fitting (Fig.
1482).
11. Using a 1-1/8" crowfoot wrench, remove the counter-
balance valve hydraulic line nut from the 4-spool
valve fitting (Fig. 1483).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1482
DSC-1903a
Fig. 1483
DSC-1905a
12. Using a 1-1/8" wrench, remove the hydraulic line
nut from the fitting located on the top of the counter-
balance valve (Fig. 1484).
13. Using a 7/16" socket and wrench, remove the
counterbalance valve mounting bolt, washers,
spacer and nut (Fig. 1485).
Fig. 1484
DSC-1910a
Fig. 1485
DSC-1911a
6/2-45