Tilt Cylinder Replacement (New Style)
A. New style tilt cylinder
Tilt Cylinder Removal
1. Remove the shoulder bolt from the lower pivot pin
(Fig. 0685).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/HYDRAULICS
A
B
Fig. 0684
DSC-3929a
B. Old style tilt cylinder
Fig. 0685
DSC-2854a
2. Support the attach plate. Remove the pivot pin from
the tilt cylinder/attach plate pivot (Fig. 0686).
3. Remove the cable tie securing the hydraulic lines to
the tilt cylinder barrel (Fig. 0687).
Fig. 0686
DSC-2855a
Fig. 0687
DSC-2856a
4/2-41