Toro 22317 Service Manual page 384

21. Remove the hub from the wheel motor shaft and
discard (Fig. 1287).
22. Place a drain pan under the rear wheel motor.
23. Using a 1-1/8" wrench, remove the upper hydraulic
line from the upper wheel motor fitting (Fig. 1288).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/DRIVE SYSTEM
DSC-0849a
Fig. 1287
DSC-0851a
Fig. 1288
24. Using a 1-1/8" wrench, loosen the rear upper
hydraulic line from the bulkhead fitting in the main
frame (Fig. 1289).
25. Rotate the upper hydraulic line out and allow the
fluid to drain in the drain pan (Fig. 1290).
DSC-0852a
Fig. 1289
DSC-0853a
Fig. 1290
6/1-17