Toro 22317 Service Manual page 275

4-PAW GAS/DRIVE SYSTEM
26. Using a 1/1/8" wrench, remove the lower hydraulic
line from the lower wheel motor fitting (Fig. 0899).
27. Allow the fluid to drain into the pan (Fig. 0900).
5/1-6
DSC-0933a
Fig. 0899
DSC-0934a
Fig. 0900
28. Using a 1-1/16" socket, remove the 2 wheel motor
fittings (Fig. 0901).
29. Cap the lines, fittings and ports to prevent debris
from contaminating the system.
30. Support the wheel motor with a floor jack (Fig.
0902).
Toro Wheeled CUL Service Manual
DSC-0940a
Fig. 0901
DSC-0942a
Fig. 0902