15. Install the auxiliary valve hydraulic line nut to the
4spool valve tfitting (Fig. 0612).
16. Install the 2 hydraulic tilt cylinder lines to the 4-spool
valve (Fig. 0613).
Note: The hydraulic line on the rod end of the tilt
cylinder connects to the top fitting on the
4-spool valve.
Toro Wheeled CUL Service Manual
CHAIN DRIVE/HYDRAULICS
Fig. 0612
DSC-2729a
Fig. 0613
DSC-2727
17. Install all 4 counterbalance valve hydraulic lines to
the 4spool valve fittings (Fig. 0614).
18. Install the two hydraulic lift cylinder tfittings to the
4spool valve fittings (Fig. 0615).
Fig. 0614
DSC-2834a
Fig. 0615
DSC-2837a
4/2-21