ALL UNITS/GENERAL
3. Remove the spring and manifold from the flow
divider body (Fig. 0108).
4. Remove a snap ring and an o-ring from either end of
the flow divider spool. There is one on each side of
the valve body (Fig. 0109).
3/1-30
IMG-0525a
Fig. 0108
IMG-0526a
Fig. 0109
5. Remove the spool from the valve body (Fig. 0110).
6. Remove the o-rings and the back-up o-rings from
the flow divider and discard (Fig. 0111):
B
C
D
E E
A. Spool
B. Snap ring (2)
C. Seal (2)
Toro Wheeled CUL Service Manual
IMG-0527a
Fig. 0110
A
D
C
B
IMG-0528a
Fig. 0111
D. Back-up ring (2)
E. O-Ring (2)