81. Using a 1/4" socket, install the self tapping screw
and washer securing the harness wire r-clamp to the
frame (Fig. 1774).
82. Using a Phillips screw driver, install the screw
securing the oil sensor wire to the oil sensor (Fig.
1775).
Toro Wheeled CUL Service Manual
Fig. 1774
DSC-2615a
Fig. 1775
DSC-2617a
4-PAW DIESEL/ENGINE
83. Plug the harness wire (blue) onto the solenoid
terminal (Fig. 1776).
84. Plug the starter connector into the fusible link (Fig.
1777).
Fig. 1776
DSC-2618a
Fig. 1777
DSC-2619a
6/4-47