Toro 22317 Service Manual page 505

4-PAW DIESEL/ENGINE
43. Using a 15mm socket, install 5 bolts and lock
washers securing the flywheel adapter to the
flywheel (Fig. 1738 and Fig. 1739).
Note: Use a 22mm socket or wrench on the oppo­
site end of the engine to prevent the engine
from turning while tightening the flywheel
adapter mounting bolts.
6/4-38
Fig. 1738 DSC-2518a
Fig. 1739 DSC-0067a
44. Torque the 5 mounting bolts to 19 ± 2 ft-lbs. (26 ± 3
Nm) (Fig. 1740).
45. Apply thread locking compound to pump pulley
shoulder bolts (Fig. 1741).
Toro Wheeled CUL Service Manual
Fig. 1740 DSC-2522a
Fig. 1741 DSC-2524a