Toro 22317 Service Manual page 331

4-PAW GAS/ENGINE
7. Lower the loader arm until the loader arm end of the
cylinder rods are resting on the cylinder locks.
8. Place a drain pan under the rear left corner of the
machine to drain the engine oil.
9. Uncap the engine oil drain valve (Fig. 1106).
10. Place one end of a hose on the drain valve and the
other end in the drain pan (Fig. 1107).
5/4-2
Fig. 1106 DSC-1092a
Fig. 1107 DSC-1094a
11. Open the drain valve (push in, turn counterclockwise
and pull out) (Fig. 1108).
12. When the oil has drained completely, close the drain
valve and remove the hose. Replace the dust cap.
13. Disconnect the negative and then the positive bat-
tery cable (Fig. 1109).
A
B
A. Negative battery cable B. Positive battery cable
Toro Wheeled CUL Service Manual
Fig. 1108 DSC-1095a
Fig. 1109 DSC-1369a