8. Rotate the upper hydraulic line into position aligning
it with the upper wheel motor fitting. Use a 1-1/8"
wrench to install the upper hydraulic line to the upper
wheel motor fitting (Fig. 1256 and Fig. 1257).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/DRIVE SYSTEM
DSC-0962a
Fig. 1256
DSC-0963a
Fig. 1257
9. Use a 1-1/8" wrench to tighten the front upper
hydraulic line to the bulkhead fitting in the main
frame (Fig. 1258).
10. Start the machine. Allow the air to purge from the
hydraulic system. Check the wheel motor, hydraulic
lines and fittings for leaks.
11. Turn the machine off and remove the key.
DSC-0964a
Fig. 1258
6/1-9