12. Connect the hydraulic line (F) to the bottom of the
flow divider valve (Fig. 1400).
13. Install the hydraulic line nut to the fitting on top of the
flow divider valve (Fig. 1401).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1400
DSC-3032a
Fig. 1401
DSC-3036a
14. Install the (B & C) hydraulic lines to the selector
valve. Make sure the two hydraulic lines are routed
to the inside of the hydraulic line going from the
t-fitting to the flow divider valve (Fig. 1402).
15. Connect the auxiliary safety switch plug (located
under the auxiliary valve) to the wire harness plug
(Fig. 1403).
Fig. 1402
DSC-3039a
Fig. 1403
DSC-3043a
6/2-23