8. Using a 7/16" socket and wrench, install a nut onto
the counterbalance valve mounting bolt (Fig. 1003).
9. Using a 1-1/8" offset wrench, tighten the 3 hydraulic
hard lines to the counterbalance valve fittings (Fig.
1004).
Toro Wheeled CUL Service Manual
Fig. 1003
DSC-1027a
Fig. 1004
DSC-1028a
4-PAW GAS/HYDRAULICS
10. Position the hydraulic hard line marked F to the
counterbalance valve and bulkhead fitting. Using a
1-1/8" offset wrench, install the hydraulic line nut to
the bulkhead fitting (Fig. 1005).
11. Using a 1-1/8" offset wrench, install the other end
of the hydraulic hard line marked F to the counter-
balance valve fitting (Fig. 1006).
Fig. 1005
DSC-1032a
Fig. 1006
DSC-1033a
5/2-9