Toro 22317 Service Manual page 431

4-PAW DIESEL/HYDRAULICS
5. Using a 1-1/8" crowfoot wrench, tighten the hy draulic
line nut to the 90 degree fitting located on the bottom
of the counterbalance valve (Fig. 1464).
6. Install a washer and spacer onto the counterbalance
valve mounting bolt (Fig. 1465).
6/2-40
Fig. 1464 DSC-1855a
Fig. 1465 DSC-1858a
7. Install the bolt assembly into the slot on the counter-
balance valve (Fig. 1466).
Note: Position the spacer between the counter-
balance valve and the frame.
8. Install a washer onto the mounting bolt (Fig. 1467).
Toro Wheeled CUL Service Manual
Fig. 1466 DSC-1832a
Fig. 1467 DSC-1861a