Toro 22317 Service Manual page 400

3. Install 3 cable ties to secure the neutral switches to
the harness and the harness wires to the right hand
lift cylinder hydraulic line (Fig. 1347).
4. Position the valve up into the control panel. Install a
bolt into the upper right hand mounting hole. Position
the longest spacer between the valve and control
panel. Install a nut onto the bolt to secure (Fig.
1348).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1347 DSC-3141a
Fig. 1348 DSC-3142a
5. Position the mount bracket into the control panel
between the 4-spool valve and the frame. Align the
bracket holes with the mounting holes (Fig. 1349).
6. Install 2 bolts and washers into the mounting holes.
Position a spacer onto each bolt between the valve
and the support bracket. Install a nut onto each of
the bolts to secure (Fig. 1350).
Fig. 1349 DSC-3143a
Fig. 1350 DSC-3144a
6/2-9