Note: Lower the loader arms.
12. Raise the front of the machine (Fig. 0980).
13. Position jackstands under the front corners of the
machine. Remove the floor jack (Fig. 0981).
Toro Wheeled CUL Service Manual
Fig. 0980
DSC-3924a
Fig. 0981
DSC-0920a
4-PAW GAS/HYDRAULICS
14. Using a 13/16" socket, remove 5 lug nuts securing
the left rear wheel to the wheel hub (Fig. 0982).
15. Remove the wheel from the wheel hub (Fig. 0983).
Fig. 0982
DSC-0831a
Fig. 0983
DSC-0832a
5/2-3