Toro 22317 Service Manual page 182

10. Remove both right hand counterbalance valve hy-
draulic line nuts from the 4-spool valve (Fig. 0582).
11. Remove the 2 hydraulic tilt cylinder lines from the
4-spool valve (Fig. 0583).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/HYDRAULICS
Fig. 0582 DSC-2834a
Fig. 0583 DSC-2725a
12. Remove the auxiliary valve hydraulic line nut and
the auxiliary relief hydraulic line nut from the 4-spool
valve T­fitting (Fig. 0584).
13. Remove the 2 bolts securing the manual tube
r-clamps to the control panel (Fig. 0585). Note
there are 2 washers on each bolt: one in front of the
r-clamp and one on the back of the r-clamp.
Fig. 0584 DSC-2729a
Fig. 0585 DSC-2732a
4/2-13