9. Remove the square key from the fan shaft (Fig.
1990).
10. With a dead blow hammer, drive one of the bearings
out of the housing (Fig. 1991).
Toro Wheeled CUL Service Manual
Fig. 1990
IMG-0647a
Fig. 1991
4-PAW DIESEL/ENGINE
11. Turn the pump mount assembly over and drive out
the other bearing (Fig. 1992).
12. Install a new bearing into the pump mount assembly
(Fig. 1993).
IMG-0649
Fig. 1992
IMG-0650a
Fig. 1993
IMG-0651a
6/4-105