21. Using a 1-1/8" offset wrench, remove the hydraulic
line from the front wheel motor fitting (Fig. 0493).
22. Remove the hydraulic line (Fig. 0494).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/DRIVE SYSTEM
DSC-0383a
Fig. 0493
DSC-0388a
Fig. 0494
23. Using a 1-1/8" offset wrench, loosen the hydraulic
line nut from the rear counterbalance valve fitting
(Fig. 0495).
24. Using a 1-1/8" offset wrench, remove the hydraulic
line from the rear wheel motor fitting (Fig. 0496).
DSC-0390a
Fig. 0495
DSC-0392a
Fig. 0496
4/1-61