7. Install a cable tie around the cylinder barrel and
hydraulic lines to secure (Fig. 0699).
8. Remove the drain pan.
9. Grease the upper and lower pivot pin and bushing
assemblies (Fig. 0700).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/HYDRAULICS
Fig. 0699
DSC-2884a
Fig. 0700
DSC-2885a
10. Check the hydraulic fluid and add as necessary.
11. Start the machine and purge the air from the system.
Check for leaks.
12. Check the hydraulic fluid and add as necessary.
4/2-45