CHAIN DRIVE/GAS ENGINE
13. Hook chains to the engine lift points (Fig. 0813).
Attach a properly rated hoist to the chains. Raise the
hoist to apply tension to the chains.
14. Place suitable lumber on the operator's stand.
15. Raise the hoist and position the engine partially
into the main frame and resting on the lumber (Fig.
0814).
4/4-18
Fig. 0813
DSC-0700a
Fig. 0814
DSC-0735a
16. Remove the chains and hoist (Fig. 0815).
17. Slide the engine into position in the main frame so
the engine mount plate mounting holes align with the
mounting holes in the main frame (Fig. 0816).
Toro Wheeled CUL Service Manual
Fig. 0815
DSC-0736a
Fig. 0816
DSC-0739a