29. With the wheel motor resting on the floor jack,
slide the floor jack toward the opposite side of the
machine to remove the wheel motor from the main
frame (Fig. 0501). Lower the floor jack and slide it
out from under the machine to remove the wheel
motor (Fig. 0502).
30. To service the existing wheel motor, refer to the
Parker Hydraulics Service Manual (Toro Form No.
492-4753).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/DRIVE SYSTEM
DSC-0404a
Fig. 0501
DSC-0405a
Fig. 0502
4/1-63