5. Position a spacer between the frame and the aux-
iliary valve. Install a bolt through the valve and the
spacer (Fig. 1392).
6. Install and tighten the remaining 5 bolts, spacers,
washers, and 6 nuts through the valves and the
upper frame assembly (Fig. 1393).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1392
DSC-3010a
Fig. 1393
DSC-3928a
7. Tighten the two jam nuts: one located between the
flow divider valve and the selector valve (Fig. 1394)
and the other on the t-fitting between the selector
valve and auxiliary valve (Fig. 1395).
Fig. 1394
DSC-3017a
Fig. 1395
DSC-3019a
6/2-21