ALL UNITS/GENERAL
15. Lubricate the spools and insert them into the valve
body (Fig. 0241).
16. Apply grease to the 4 ball/sockets inside the 4
operator assemblies (Fig. 0242).
3/1-66
IMG-0299a
Fig. 0241
IMG-0302a
Fig. 0242
17. Install the 4 operator assemblies onto the valve body
so that the ball in the operator assembly is captured
inside the socket (hole) in the spool (Fig. 0243).
18. Install the 4-spool return springs (Fig. 0244).
Toro Wheeled CUL Service Manual
IMG-0303a
Fig. 0243
IMG-0306a
Fig. 0244