Toro 22317 Service Manual page 126

3. Inspect the chain assembly. Replace if damaged or
worn (Fig. 0376).
4. Inspect the front and rear sprockets. If wear is indi-
cated on the front or rear sprocket, both sprockets
and the chain should be replaced (Fig. 0377).
Note: The wheel assembly was removed for photo
purposes.
Toro Wheeled CUL Service Manual
CHAIN DRIVE/DRIVE SYSTEM
DSC-0249a
Fig. 0376
DSC-0248a
Fig. 0377
5. Install the chain cover and tighten the bolts (Fig.
0378 and Fig. 0379).
DSC-0262a
Fig. 0378
DSC-0264a
Fig. 0379
4/1-29