Toro 22317 Service Manual page 428

12. Using an 11/16" wrench, remove the lift cylinder
t-fitting from the lower fitting on the 4-spool vale (Fig.
1452).
13. Using a 1-1/8" crowfoot wrench, remove the left
hand counterbalance valve line nut from the lower
fitting on the 4-spool valve (Fig. 1453).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1452 DSC-1811a
Fig. 1453 DSC-1815a
14. Using a 1-1/8" crowfoot wrench, loosen the hydraulic
line nut on the 90 degree fitting on the bottom of the
counterbalance valve (Fig. 1454).
15. Using a 1-1/8" wrench, remove the hydraulic line nut
from the top counterbalance valve fitting (Fig. 1455).
Fig. 1454 DSC-1823a
Fig. 1455 DSC-1827a
6/2-37