Mitsubishi Electric M800 Series Manual page 738

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#82763+10(k-1)
Specify the project No. of PLC devices that perform link refresh with the link devices. (k=1 to 64)
---Setting range---
0 to 6
0: No setting
#82764+10(k-1)
Specify the name of PLC devices that perform link refresh with the link devices. (k=1 to 64)
---Setting range---
RX: 0, X, M, L, B, D, W, R
RY: 0, Y, M, L, B, D, W, R
RWr, RWw: 0, M, L, B, D, W, R
0: No setting
#82765+10(k-1)
Specify the start device No. of PLC devices that perform link refresh with the link devices. (k=1 to 64)
If you designate bit devices, set the number in increments of 16.
---Setting range---
X: 0 to 5F0
Y: 0 to 5F0
M: 0 to 61424
L: 0 to 32752
B: 0 to EFF0
D: 0 to 32767
W: 0 to 7FFF
R: 8300 to 9799, 9800 to 9899, 18300 to 19799, 19800 to 19899, 28300 to 29799, 29800 to 29899
#2 N01 Refr-d PNo.
#2 N01 Refr-d name
#2 N01 Refr-d DNo.
721
Refresh device project No.
Refresh device name
Refresh device start device No.
IB-1501279-H