No Tab Counter Sw.; 2$ Disp Switch Typ; Initial Type - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
(PR) #8945 $4 color
Set the color to be shown on the top-left of screen and window title for the 4th part system. This enables
switching the color patterns for each part system.
When set to the values "1" to "8", the part system name is shown in the form of button image.
(Note 1) Enabled when "#8942 $1 color" is set to the values "1" to "8".
(Note 2) When set to "1", the color is determined by the setting of "#11060 Screen theme color".
1: Theme color (default)
2: Pink
3: Light blue
4: Orange
5: Green
6: Fuchsia
7: YellowGreen
8: Brown
#8951

No Tab counter sw.

Disable Tab key to change the counter type.
0: Enable Tab key to change counter type
(The value of #8905 also changes.)
1: Disable Tab key to change counter type
#8952 Edit-win $ switch
Select whether to enable switching of program displayed in the edit window on Monitor screen according to
the displayed part system when part system switch is performed.
0: Not switch
1: Switch
#8953

2$ disp switch typ

Select how to switch the part system to display when the 2-, 3- or 4-part system simultaneous display is en-
abled.
0, 1: The No. of part system to display is incremented by one. The operation target is switched when the
part system displayed in the non-active area is selected.
2: The operation target on the left side is fixed to $1. When $1 is selected for the part system switch, the
left side is the operation target. When $2 or after is selected, the displayed part system on the right side
is incremented by one.
(Note) [M8] 3- or 4-part system simultaneous display is enabled for a 15- or 19-type display unit only.
[C80] 3- or 4-part system simultaneous display is not available.
#8954

Initial type

[M8]
Select the default setting of the coordinate axis direction designation method to be displayed on the [Surface
detail] screen of R-Navi.
0,1: Point (+) on the axis
2: Latitude/Longitude
3: Latitude/Projection angle
4: Start point/End point
5: Index angle
[C80]
Not used.
303 IB-1501279-H