M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#1571
SSSdis
Fix the shape recognition range for SSS control.
---Setting range---
0/1
#1572
Cirorp
This eliminates speed fluctuations at the joint of the arc and straight line and arc and arc.
Set as a bit unit.
0: Do not overlap the arc command blocks
1: Overlap the arc command blocks
bit0 : Arc command during high-speed high-accuracy control II
bit1 : Arc command during high-speed machining mode II
bit2 : Arc command during high-accuracy control (G61.1)
bit3 : Arc command during cutting mode (G64)
The line command block and arc command block won't be overlapped during G61.2 modal regardless of this
setting.
(Note) This parameter is invalid during SSS control.
---Setting range---
0 to F (hexadecimal)
#1573
Ret1
Select the axis to be moved later after tool return.
This is referred to with the movement path (transit point #1 -> interrupt point).
Up to eight axes can be specified by expressing one axis with one bit.
bit0 : Transit point #1 1st axis
bit1 : Transit point #1 2nd axis
bit2 : Transit point #1 3rd axis
bit3 : Transit point #1 4th axis
bit4 : Transit point #1 5th axis
bit5 : Transit point #1 6th axis
bit6 : Transit point #1 7th axis
bit7 : Transit point #1 8th axis
---Setting range---
00000000 to 11111111 (Binary)
IB-1501279-H
SSS control adjustment coefficient fixed value selec-
tion
Arc command overlap
Return type 1
362