Mitsubishi Electric M800 Series Manual page 680

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#24011+40(n-1)
[M8]
Set the data link status for when the master station failure occurs.
"n" represents the expansion slot No.(n=1 to 3)
0: Fixed to stop
(Note) Refer to "CC-Link System Master/Local Module User's Manual (SH(NA)-080394E)" for the details of
the functions.
---Master station---
Set to "0" (fixed).
---Local/standby master station---
Set to "0".
#24012+40(n-1)
[M8]
Select whether to synchronize the link scan with one ladder scan.
"n" represents the expansion slot No.(n=1 to 3)
0: Fixed to synchronize
---Master station---
Set to "0" (fixed).
---Local/standby master station---
Set to "0".
#24013+40(n-1)
[M8]
Set the delay time.
"n" represents the expansion slot No.(n=1 to 3)
0: (Fixed value)
---Master station---
Set to "0" (fixed).
---Local/standby master station---
Set to "0".
#24014+40(n-1)
[M8]
Set the refresh device name of the remote input (RX) to be automatically refreshed.
(Example) X
"n" represents the expansion slot No.(n=1 to 3)
Set "0" when no setting is required.
---Master station---
Set a value within the setting range.
---Local/standby master station---
Set a value within the setting range.
---Setting range---
0,X,M,L,B,D,W,R
SLn ope at NC down
SLn scan mode
SLn delay time
SLn RX dev name
663
Operation at NC down
Scan mode
Delay time
Remote input (RX) refresh device name
IB-1501279-H