Rotary Axis Configuration Parameters - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters

16.11 Rotary Axis Configuration Parameters

(PR) #7900 RCDAX_I
Set the name of the horizontal axis in the orthogonal coordinate system.
Set "0" when horizontal axis is not used.
---Setting range---
A,B,C,U,V,W,X,Y,Z
2-digit of A to Z and 1 to 9
0: Mechanical axis specifications
(PR) #7901 RCDAX_J
Set the name of the vertical axis in the orthogonal coordinate system.
Set "0" when vertical axis is not used.
---Setting range---
A,B,C,U,V,W,X,Y,Z
2-digit of A to Z and 1 to 9
0: Mechanical axis specifications
(PR) #7902 RCDAX_K
Set the name of the height axis in the orthogonal coordinate system.
Set "0" when height axis is not used.
---Setting range---
A,B,C,U,V,W,X,Y,Z
2-digit of A to Z and 1 to 9
0: Mechanical axis specifications
#7903 G92_CRD
Select the coordinate to preset when issuing an origin zero command (G92X_Y_Z_;).
0: Tool center coordinate
1: Holder center coordinate
#7904 NO_TIP
Select whether to enable the tool handle feed.
0: Enable (tool handle feed)
1: Disable (standard)
#7905 NO_ABS
Select how to update the display of tool axis travel amount.
0: Update at ABS switch OFF
1: Update at every ON and OFF of ABS switch
#7906 PASSTYP
Select the movement after passing a singular point.
0: Type 1
A/B axis rotation angle will be in the same sign direction as that when the tool center point control started.
1: Type 2
C axis rotation amount on the singular point will be smaller.
#7907 CHK_ANG
Set the angle for judging a position near the singular point.
When "0.000" is set, it will operate as 1.000(°).
---Setting range---
0.000 to 5.000 (°)
#7908 SLCT_PRG_COORD
Select the coordinate system for the programming coordinate.
0: Table coordinate system (coordinate system that rotates together with workpiece)
1: Workpiece coordinate system
IB-1501279-H
Orthogonal coordinate horizontal axis name
Orthogonal coordinate vertical axis name
Orthogonal coordinate height axis name
Origin zero set coordinate selection
Tool handle feed function selection
Selection of tool axis travel amount display at manual
ABS switch ON/OFF
Singular point passage type
Near singular judgment angle
Programming coordinate system selection
618