No Spec: Figure Rotation; Figure Rotation Overlapped; Coord Rotate In Fig. Rotation; No Spec: Coordinates Rotation - Mitsubishi Electric M800 Series Manual

Hide thumbs Also See for M800 Series:

Table of Contents

M800/M80/E80/C80 Series Alarm/Parameter Manual

12 Program Errors (P)

No spec: Figure rotation

Figure rotation (M98 I_J_P_H_L_) was commanded though it is out of specifications.

Check the specifications.

Figure rotation command was issued during figure rotation.

Correct the program.

A coordinate rotation related command (G68, G69) was issued during figure rotation.

Correct the program.

A coordinate rotation command was issued though it is out of specifications.

Check the specifications.

G code illegal (Coord rot)

Another G code or a T command has been issued in the block of coordinate rotation command.

Correct the program.

Illegal modal (Coord rot)

A coordinate rotation command has been issued during modal in which coordinate rotation is not allowed.

Correct the program.

No spec: User macro

A macro specification was commanded though it is out of specifications.

Check the specifications.

No spec: Macro interrupt

A macro interruption command has been issued though it is out of specifications.

Check the specifications.

NC and macro texts in a block

An executable statement and a macro statement exist together in the same block.

Place the executable statement and macro statement in separate blocks in the program.

IB-1501279-H

Show Quick Links

Table of Contents

C80 series M80 series E80 series